Quick answer
The current Changan UAE brochure lists the CS75 Plus (Sport grade) with a 2.0-litre turbocharged direct-injection petrol engine (2.0T GDI) producing 390 N·m from 1,900 to 3,300 rpm, with two-wheel drive (2WD) and an Aisin 8-speed automatic. Use the oil grade and approval Changan specifies for that engine. The brochure prints no model year or engine code, and ShipMyPart has not verified the oil grade, quantity or interval, so we confirm your engine by VIN before supplying oil and a filter.
What the UAE brochure tells us, and what it leaves out
| Item | Changan UAE brochure | Oil impact |
|---|---|---|
| Engine | 2.0T GDI | Turbo + direct injection: approval matters |
| Torque | 390 N·m from 1,900 rpm | High load at low revs |
| Engine code, model year | Not printed | Confirmed from your VIN |
| Oil grade, quantity, interval | Not printed | Confirmed from your VIN |
Older CS75 Plus cars sold in other markets used different engines, so a car imported from elsewhere should be checked by VIN as well.
Specifications
| Item | Value | Source |
|---|---|---|
| Grade on the current UAE brochure | Sport | changan.ae |
| Engine | 2.0-litre turbo petrol, direct injection (2.0T GDI) | changan.ae |
| Maximum torque | 390 N·m at 1,900–3,300 rpm | changan.ae |
| Transmission | Aisin 8-speed automatic (8AT) with Sport, Normal and Economy modes | changan.ae |
| Driven wheels | Two-wheel drive (2WD) | changan.ae |
Fluid specifications for this model are confirmed by VIN on request.
Direct injection: the reason the label matters
In a GDI engine the injector sits in the combustion chamber, so fuel never washes the back of the intake valves and a small amount of fuel can reach the oil, especially on short runs. Oils carrying the approval the manufacturer asks for are tested against this kind of dilution and against the low-speed pre-ignition that turbo direct-injection engines can suffer. That is why the approval printed on the bottle is as important as the viscosity numbers.
390 N·m at low revs: what it means for the oil
The CS75 Plus reaches its peak torque from 1,900 rpm. Pulling a loaded family SUV away from lights, or climbing a ramp in a multi-storey car park, puts heavy load on the bearings at low engine speed, when oil pressure is lower than at cruising revs. Oil that is old, diluted or the wrong grade thins out under that load, and the protection margin shrinks.
A practical oil-service checklist
- Oil of the grade and approval Changan specifies for your engine.
- A new oil filter every time.
- A new sealing washer for the drain plug on the oil pan.
- A look at the air filter, since a dusty filter feeds grit into the engine.
- The odometer reading noted on the service record.
Warning signs and what they can point to
| Sign | Possible cause | Next step |
|---|---|---|
| Red oil-can light | Low pressure or a failing pressure sensor | Stop safely, switch off, check the level |
| Rattle on cold start | Oil too thin or overdue | Have the oil and level checked |
| Blue smoke under boost | Oil reaching the turbocharger intake side | Ask for a turbo inspection |
These are possibilities, not a diagnosis. For major engine work we can also source a CS75 Plus engine assembly.
A family SUV in UAE conditions
Typical CS75 Plus use here mixes school runs, mall trips and long weekend drives between emirates in summer heat. Short cold-start trips and long idling with the air-conditioning on are the conditions most service books call severe. Ask your service advisor which schedule applies. The brochure shows a 6-year / 250,000 km warranty; keep oil-service records, because warranty claims often ask for them. We have not verified the oil-change interval, so we do not quote one.
Ordering oil for a CS75 Plus
Message us the VIN from your Mulkiya and the current mileage. We confirm which engine your car has, match the oil to Changan's specification for it, work out how many litres are needed with the filter, and quote with delivery anywhere in the UAE.
Compatible products
Compatibility verification required
No fluid or part is listed here until its specification has been checked against Changan's requirement for your vehicle. Send your VIN and we will confirm what fits before you order.
Confirm by VIN before you order
Send your VIN (chassis number) and we will confirm the correct engine oil for your Changan CS75 Plus.
Related Changan CS75 Plus parts
More Changan CS75 Plus maintenance guides
Frequently asked questions
What engine is in the Changan CS75 Plus in the UAE?
The current Changan UAE brochure lists a 2.0-litre turbo petrol with direct injection (2.0T GDI), with 390 N·m of torque.
Which oil does the CS75 Plus need?
The grade and approval Changan specifies for the 2.0T GDI. ShipMyPart has not verified them; check the owner's manual or send us your VIN.
Why does direct injection change the oil choice?
GDI engines can dilute oil with fuel and need oils approved against deposits and low-speed pre-ignition, so the approval on the label matters.
How much oil does the CS75 Plus take?
We confirm the quantity with a filter change by VIN; it is not verified on this page.
How often should I change the oil?
Follow the service book or a Changan service centre, including the severe-use schedule. We don't quote an interval until it is verified.
Can ShipMyPart supply oil and a filter?
Yes. After a VIN check we supply the specified oil and a matching filter, delivered in the UAE.
Need parts or fluids for your Changan CS75 Plus?
Contact ShipMyPart on WhatsApp or request a quote. We deliver across the UAE.