MG3 Coolant Guide: GS64 1.5 Petrol

العربية

Quick answer

The MG3's GS64 1.5-litre petrol engine, listed on MG UAE's current brochure, needs the coolant type MG specifies to control temperature and protect the cooling system from corrosion. Don't choose coolant by colour. ShipMyPart has not verified the coolant type, mix, capacity or interval, so we confirm what your MG3 needs from the VIN before supplying coolant or cooling parts.

Coolant scope

Known for the MG3Still to confirm per car
GS64 1.5 petrol engine, CVT, front-wheel driveCoolant type, mix, capacity, interval and model year

Specifications

ItemValueSource
EngineGS64 1.5-litre petrolmedia-hub-prod.mgmotor.me
Engine codeGS64media-hub-prod.mgmotor.me
Power / torque81 kW @ 6,000 rpm / 140 N·m @ 4,500 rpmmedia-hub-prod.mgmotor.me
FuelRON 91 petrol and abovemedia-hub-prod.mgmotor.me
TransmissionCVTmedia-hub-prod.mgmotor.me
DriveFront-wheel drive (FWD)media-hub-prod.mgmotor.me

Fluid specifications for this model are confirmed by VIN on request.

Small system, small margin

A compact car has a compact cooling system: less coolant overall, so losing even a modest amount through a weeping hose shows up as a higher temperature sooner than on a large SUV. That is why the reservoir level on a small car deserves a regular look, especially in summer.

What the specified coolant protects

Beyond stopping boiling and freezing, coolant carries inhibitors that protect the radiator, the water pump seal and the engine passages against corrosion. Different coolant chemistries can react when mixed, so top up only with the type MG specifies.

Checking an MG3 between services

WhenWhat to do
Morning, before the first driveEngine cold: read the reservoir against its marks
After a hot afternoon in the cityDon't open anything; note any sweet smell or drips and look again next morning
When the bonnet is open anywayLook for white or green crust on hose joints, a sign of a slow leak

If the temperature warning comes on

  1. Turn the air-conditioning off.
  2. Pull over where it is safe and switch the engine off.
  3. Wait until everything is cold before opening anything.
  4. Have the cause found: possible culprits include a thermostat, a hose, the pump or the fan.

MG3 cooling parts

Once the technician finds the source, we supply the matching MG3 part by VIN: the radiator if its fins are corroded or leaking, the water pump if it weeps from its drain hole, the thermostat if it sticks, or the expansion tank and hoses if they crack.

Coolant for an MG3

Send the VIN; if you have needed to top up more than once, mention it. We confirm MG's coolant for the GS64 and can quote the coolant with any part your workshop names, delivered in the UAE.

Compatible products

Compatibility verification required

No fluid or part is listed here until its specification has been checked against MG's requirement for your vehicle. Send your VIN and we will confirm what fits before you order.

Confirm by VIN before you order

Send your VIN (chassis number) and we will confirm the correct coolant for your MG MG3.

Send VIN on WhatsApp Request a quote

More MG MG3 maintenance guides

Frequently asked questions

What coolant does the MG3 use?

The type MG specifies for the GS64. ShipMyPart has not verified it; check the owner's manual or send us your VIN.

Can I mix coolants in my MG3?

Only if both meet the same specification; colour is not a guide.

Can I top up with water?

Only in an emergency; restore the correct mix soon after.

Is it safe to drive an overheating MG3?

No. Stop safely and switch off, then have it inspected.

How much coolant does the MG3 hold?

ShipMyPart has not verified the capacity; we confirm it by VIN.

When should MG3 coolant be replaced?

Follow the service book or an MG service centre. We don't quote an interval until it is verified.

Need parts or fluids for your MG MG3?

Contact ShipMyPart on WhatsApp or request a quote. We deliver across the UAE.

WhatsApp Request a quote