Jetour X50 Engine Oil Guide: 1.5T Petrol

العربية

Quick answer

Jetour UAE's 2027 specification sheet lists one X50 powertrain: a 1.5-litre turbocharged in-line four-cylinder petrol engine of 1,498 mL with port fuel injection, rated at 156 PS (115 kW) and 230 N·m, driving the front wheels through a 6-speed dual-clutch gearbox. The sheet does not publish an engine code, and ShipMyPart has not verified the oil grade, quantity or change interval, so we confirm the engine from your VIN before supplying oil and a filter.

What we can and cannot confirm for the X50

FactFrom Jetour UAE (2027 sheet)
Engine1.5T, 1,498 mL, port injection
Engine codeNot published
Oil grade, approval, quantity, intervalNot published; confirmed per VIN
Earlier model yearsNo official sheet found; confirmed per VIN

Specifications

ItemValueSource
Trim on the MY2027 sheetPremiumwww.jetouruae.com
Engine (MY2027)1.5-litre turbo petrol, in-line 4, 1,498 mLwww.jetouruae.com
Power / torque (MY2027)156 PS (115 kW) / 230 N·mwww.jetouruae.com
Fuel system and engine build (MY2027)Port fuel injection (PFI); aluminium head, iron blockwww.jetouruae.com
Transmission (MY2027)6-speed dual-clutch (6DCT)www.jetouruae.com
Drive (MY2027)Front-wheel drive (FF)www.jetouruae.com

Fluid specifications for this model are confirmed by VIN on request.

Why the missing engine code matters

Oil requirements are set per engine, and engines are identified by a code, not by "1.5T". Several Jetour models use 1.5-litre turbo engines, and the official X50 sheet stops at "1.5T". Without the code, the safe route is the VIN: it identifies the exact engine fitted, and from that the oil specification in Jetour's service data.

That is also why we don't assume the X50 takes the same oil as another Jetour with a similar-sounding engine.

Port injection, turbo and what the oil does

On the X50 sheet the fuel is delivered by port injection (PFI): petrol is sprayed into the intake ports, so the intake valves are washed by fuel. The turbocharger, however, still depends on engine oil for lubrication and cooling, and a compact engine compartment holds heat after a drive. Oil that has aged or that does not meet the specified approval protects the turbo bearings less well.

A short checklist before buying oil

  1. Get the oil grade and approval for your engine from the owner's manual or by sending us the VIN.
  2. Buy enough for a change with a new oil filter.
  3. Replace the drain-plug washer to keep the oil pan dry.
  4. Note the date and odometer reading so the next service is not guessed.

Warning signs on an X50

  • Red oil-pressure symbol: stop safely and switch off. If the level is correct, have the oil pressure sensor and pump checked.
  • Oil needed between services: look for leaks or oil use before topping up again.
  • Smoke or a whine under boost: ask for the turbocharger and its oil lines to be inspected.

For major engine work we can also source an X50 engine assembly.

City driving in the UAE

The X50 is a compact five-seater that spends much of its life in city traffic: short trips, long idling at lights with the air-conditioning on, and car parks in full sun. Service books usually class these conditions as severe, so read the severe-use schedule in yours. Jetour UAE lists a 3-year / 30,000 km service contract on the 2027 sheet; if it applies to your car, check what it includes before buying oil. We have not verified the change interval, so we don't quote one.

Ordering oil for an X50

Send the VIN on WhatsApp or via the quote form and tell us whether you also need the filter and washer. We identify the engine, match the oil Jetour specifies, confirm the amount and quote with UAE delivery.

Compatible products

Compatibility verification required

No fluid or part is listed here until its specification has been checked against Jetour's requirement for your vehicle. Send your VIN and we will confirm what fits before you order.

Confirm by VIN before you order

Send your VIN (chassis number) and we will confirm the correct engine oil for your Jetour X50.

Send VIN on WhatsApp Request a quote

More Jetour X50 maintenance guides

Frequently asked questions

What engine does the Jetour X50 have?

Jetour UAE's 2027 sheet lists a 1.5-litre turbo petrol in-line four, 1,498 mL, 156 PS and 230 N·m, with port fuel injection.

What is the X50 engine code?

The official 2027 sheet does not publish one. We identify the engine from your VIN.

Which oil grade does the X50 need?

The grade and approval Jetour specifies for the engine fitted. ShipMyPart has not verified them; check the owner's manual or send us your VIN.

How much oil does the X50 take?

The quantity with a filter change is in the owner's manual. We confirm it by VIN.

How often should the X50 oil be changed?

Follow the service book or a Jetour service centre, including the severe-use schedule. We don't quote an interval until it is verified.

Can ShipMyPart supply oil and a filter for my X50?

Yes. After a VIN check we supply the specified oil and a matching filter with delivery in the UAE.

Need parts or fluids for your Jetour X50?

Contact ShipMyPart on WhatsApp or request a quote. We deliver across the UAE.

WhatsApp Request a quote